Process Control/Redundant

Supported products

Mitsubishi Electric System & Service

QP-AW is made of plastic material having break-proof ^*1 and superior bending characteristics ^*2
A wide range of lineup supports versatile environments. CC-Link Partner Association recommended products
The indoor and outdoor use cables are free of tension members, and have an allowable tension equivalent to the reinforced type for outdoor use that allows them to be pulled directly
QG-BU for indoor use supports the high flame resistant UL Listed (UL Type OFNR) compatible cable that has passed the UL1666 Riser Flame Test
Reinforced type outdoor use cables are waterproof, and can be used even in flooded or temporarily submerged areas
A connector boot with improved bending characteristics reduces the possibility of fiber breakage at the connector base

Model			QP-AW ^*3	QG-AW	QG-B	QG-BU	QG-VCT	QG-C	QG-DL
Operating environment/ application			In the control panel	In the control panel	Indoor	Indoor, UL approved	Indoor, movable	Outdoor	Outdoor, reinforced (water shielding)
Max. cable length			10 m	550 m
Optical fiber types			Multi-mode optical fiber (GI)
Material/ outer diameter	Core		Plastic/ 55 ± 5 µm	Fused quartz/50 ± 3 µm
	Clad		Plastic/ 490 ± 5 µm	Fused quartz/125 ± 2 µm
	Code jacket	Material	PVC (blue)	PVC (orange)
	Code jacket	Outer diameter	ø2.0 mm × 2	ø2.0 mm × 2	ø2.0 mm × 2	ø1.8 mm × 2	ø2.0 mm × 2		ø2.0 mm × 2, 4, 6, 8
	Cable jacket	Material	–	–	Flame retardant PE (orange)	Flame retardant PVC (blue)	Elastic PVC (orange)	Flame retardant PE (black)	LAP sheath (black)
		Outer diameter	–	–	ø6.0 mm	ø5.0 mm	ø6.0 mm		2, 4 cores	10.0 mm
									6 cores	11.0 mm
									8 cores	12.0 mm
Operable temperature range			-20…60°C
Adaptable connector			LCF connector ^4 , SC connector ^3 , FC connector ^*3

*1. The allowable tension is about twice the QG-AW.
*2. The allowable bending radius is about 1/2 times the QG-AW.
*3. The QP-AW does not support the following.
SC, FC connector
Processing of connectors at the site, fusion splice
Splice connection of connectors
Media converter and connection terminal
*4. Use LCF connector for connection to the CC-Link IE Controller Network products. (LCF connector: two LC connectors are connected) When installing CC-Link IE Controller Network-compatible optical cable, please refer to the installation manual of the CC-Link Partner Association.

Converting 1000BASE-T/100BASE-TX to 1000BASE-LX/SX and vice versa can extend the station to station distance (DMC-1000TL-DC: maximum 10 km, DMC-1000TS-DC: maximum 550 m)
Noise immunity performance ideal for FA environments ensures use as noise/lightening measures to protect communication line
Complies with UL/CE/FCC standards enabling export to Europe and North America

Application example (DMC-1000TL-DC)

Specification ^*5

Item		DMC-1000TL-DC	DMC-1000TS-DC
Conforming standard		IEEE802.3z (1000BASE-LX)	IEEE802.3z (1000BASE-SX)
Compatible cable	Type	1000BASE-LX compatible single mode optical cable	1000BASE-SX compatible Multi-mode optical cable (core/clad: 50/125 µm Band: 500 MHz·km or higher λ = 850 nm)
	Connector	Double LC connector (IEC 61754-20)
	Method for connection	Crossing (A to B, B to A)
Transmission distance		Max. 10 km	Max. 550 m

*5. Specifications described is about the configuration using optical cables only. For further details, please refer to the relevant product manuals.

Converting 1000BASE-T/100BASE-TX to 1000BASE-LX/SX and vice versa can extend the station to station distance (DMC-1000TL-DC: maximum 10 km, DMC-1000TS-DC: maximum 550 m)
Noise immunity performance ideal for FA environments ensures use as noise/lightening measures to protect communication line
Complies with UL/CE/FCC standards enabling export to Europe and North America

Application example

Specifications

Item		DMC-1000SL-DC
Item		OPT1 port	OPT2 port
Conforming standard		IEEE802.3z Gigabit Ethernet (1000BASE-LX)	IEEE802.3z Gigabit Ethernet (1000BASE-SX)
Transmission format		Full duplex system
Compatible cable	Optical fiber	1000BASE-LX compatible single-mode optical cable	1000BASE-SX compatible multi-mode optical cable ^*7 (core/clad 50/125 µm area 500 MHz·km or higher λ = 850 nm)
	Connector	Duplex LC connector (IEC 61754-20 compliant)
	Method for connection	Crossing (A to B, B to A)
Power supply specification		20.4…26.4 V DC (Power supply terminal block)
Standards		UL, CE, FCC Part15 Class B, VccI Class B
Max. number of connectable devices between stations		4

*6. Multi-mode optical cable can be also used for connection. The transmission distance is up to 550 m.
*7. To connect to the CC-link IE Controller Network product, use the Mitsubishi Electric System & Service QG Series optical cable.